Buy CGDI Prog MB Benz Key Programmer Full Version Get 1pc Free CGDI ELV Simulator

CGDI Prog MB Benz Key Programmer Full Version with Mileage Repair and Gateway Read/Write Support Password Calculation Function
 

Top 9 Reasons to get CGDI Prog MB Key Programmer:

1. Supports fastest Benz Car key add: collection time 1'50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.

2. Supports MB all key lost: support models including 211,209,204,207,212,166,246,197,172,164 +, 216

3. CGDI Prog MB can calculate the password online

4. Work with BE key and orginal key

5. Update Online on official website for free https://www.cgprogcar.com
6. Support more old Mercedes cars key programming by OBD compared to other Mercedes key programmer like VVDI MB BGA, such as

W210, W203, W639, W220,W215, W169

Mercedes E Series W210 before year 2004

Mercedes C Series W203 before year 2005

Mercedes V Series V639 before year 2008

Mercedes A Series W169 before year 2009

Mercedes B Series W169 before year 2009

Mercedes S Series W220 before year 2005

Mercedes E Series W211 before year 2008

7. With Mileage Repair and Gateway Read/Write Authorization Free NOW! (Since March 2nd, 2019)
Mileage Repair Support Mercedes List: 
C(W204) / GLK(X204) / CLK(207) /E(W212) /SLS(197) /CLS(W218) / R-Class(W251) /GL(X164) / ML(W164) / E-Class(W211) / CLS(W219) S-Class(W211) / CL(216) C-Class(W203/ CLK(W209) / SLK(R171)

8. CGDI MB support ECU renew on these models at present:
ME9.7, MED17, CR3.xx, CR4.xx, CR5, CR60.xx, CRD.11, CRD2.xx, , SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LE, SIMELKE
Support Gearbox Renew on EGS 7G

9. Buy CGDI MB Get Free CGDI ELV Simulator, time limited promotion!

What is the token policy for CGDI Prog MB?
First of all, remove the limit on the number of password calculations per day. You can calculate the password as much as possible within a day. 
Of course, the premise is that you have more than enough points. Please pay for $4 Only One Token for CGDI Prog MB if you need more tokens.

Plan A: Basic Edition One Free Token Lifetime 
Plan B: Advanced Edition Two Free Token Valid 180 days. 
When license gets expired, please pay to Token Service 180 Days for CGDI Prog MB Key Programmer. After you pay for it, can calculate online two times free 180 days again. 

How to activate CGDI Prog MB?
CGDI Prog MB needs activation when you receive it. Please follow the steps as below:
1. Download Benz Monster software from official website https://www.cgprogcar.com/?langid=en, there will be user manual too in the software catalogue
2. Install software on your laptop, activate device yourself from menu Online Store. 
You can choose "Basic Edition One Free Token Lifetime" or "Advanced Edition Two Free Token Valid 180 days" online yourself now.
No need to wait for engineer's activation anymore. Save much time! 


CGDI MB Prog Programming Key Features:

1) Automatically identify the basic key information (including how many times you used SSID)
2) Can directly read pin code of BE keys via infrared, can erase BE keys.
3) NEC adapter can write the original Benz smart key and common key.
4) Can write the Benz original key via infrared.
5) Can restore the data of key and EIS with the key password.

CGDI MB Prog Function List:

1) Able to add keys on Mercedes Benz and program a new key when all keys are lost.
2) Add new Mercedes Benz keys: Data acquisition for 1 minute 50 seconds, pin code for 40 seconds and 99% success.
3) Program a new key to the following models when all keys are lost: 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
4) Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
5) Can display the key status and directly disable the key position.
6) Can display EIS Number, can distinguish the Benz model
7) Can display EIS status.
8) Automatically identify EIS model.
9) Automatically identify CAN protocol
10) Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
11) Can read/write EIS via infrared.
12) Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS with only 26s,format include:11/ 41/51 (41 format is smart key data)

CGDI MB Prog Mercedes Benz Car List:

Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 - , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series  (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK  (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)
Add more later...

CGDI Prog MB Latest Update Information:

CG-MB BenzMonster V2.8.1.0 NEW (2018.12.19)

1. Added K-line all lost collection support EIS Model 202/208/210, 203/463/639
2. Optimize the Keyless repeatedly plug collecting process. Fix problems that can cause program errors in specific situations in the collection.
3. Optimize network connectivity and improve server connectivity stability.
4. Software display language increases regional restrictions.

CG-MB BenzMonster V2.8.0.0 (2018.10.28)

1. Added online store function
Now, you can self-renew your password calculation service or recharge points in the store.Currently only WeChat payment is supported.
2. Added the automatic activation function. When you first purchase a device, you can choose the subscription service version to activate the device.
Please note that the subscription version cannot be changed after activation.
3. Remove the limit on the number of password calculations per day. You can calculate the password as much as possible within a day. Of course, the premise is that you have more than enough points.
4.We greatly optimized the stability of the server. We are deeply sorry for the impact of the previous period of downtime maintenance, and we thank our customers for their support.

CG-MB Benz Monster V2.7.2.0 2018.09.20)
1. Fixed the problem that read EIS failed when 209/211 collection with key.
2. Fixed the problom that 209 sync ELV and 169 write ELV display is not clear.
3. Fixed the problom that the K-line EIS is enabled successfully, but the display fails.

CG-MB BenzMonster V2.7.1.0  (2018.09.08)
1.Added function: read FBS4 gearbox basic information
2.Fixed the problom that partial device upload data validation failed

CG-MB Benz Monster V2.7.0.0  NEW(2018.08.06)
1. Add 169 ELV erase and write function;
2. Add check EIS status function;

CGDI MB Mercedes Benz Key Programmer V2.6.0 Newest Update Info (2018-06-02):
1. Add ELV emulator function: support one-click unlock / read & write data / read password. 
2. Add ELV password writing directly without erasing EIS and synchronize. 
3. Add OBD mileage reset function for the following cluster types:
C(W204) / GLK(X204) / CLK (207) / E(W212) / SLS (197) / CLS (W218), R-Class (W251) /GL(X164) /ML(W164), E-Class (w211) /CLS(W219), S-Class (W221) /CL(216), C-Class (W203) / CLK(W209), SLK(R171).  
4. Add the gateway EE /Flash OBD reading and writing for the following gateway types:
C_Class_W204, E_class_W211, E_class_w212, CLK_X204, CLK_W207, SLS_W197, CLS_W218, M-Class_W164, R_class_W251, Slk_R171, GL_X164, S_class_W221, CL_W216. 
5. Add the non-HC05 EIS format file and the original data type save function, so that you can complete modifying the Mercedes EIS data by clicking one button. 
6. Fix the problem that a partial BE keys fail to read after writing. 
7. Add a button to clear the fault code. 
8. Fixed the problem that part of the ISM can not erase;
9. Fixed the problem that some EIS data loading error;
10. Add consumption points to calculate key password mode.
Consumption points do not have the device expiration limit, when the device expires, it can still be calculated with consumption points. Points will be in the company launched a variety of activities to be obtained, everyone stay tuned!

CGDI MB Prog 2.5.0.0 New Upgrade (2018-03-13)
1. Add ELV repair function, including: enable ELV, virgin ELV (repair damage ELV chip)
2. Add the function of BE key to save file directly
3. Add W205, W218,W166 FBS4 EIS type detection
4. Add save EIS data format flags.
5. Fixed the problem of part of the ECU,TCU,ISM/DSM/ESM cannot erase
6.Fixed the problem of computer data storage restriction
7.Fixed the problem of part of W209, W211 EIS cannot all-lost collection
8. Fixed the problem of the EIS file error caused the data can not upload calculation on EE

CGDI MB Prog Customers Feedbacks:

 -W220 first test, Read Blank Key, Read Write Erase key OK, read EZS and Password from Key...works
 -Tested on W212
  Read EZS ---> OBD work Fine
  Calulating PW from EZS ---> Work fine Online Server
  Key Calculating ---> v041 & v051 Work fine online Server
- Mercedes W212 2010 e250 Petrol Automatic works
- Mercedes W221 2010 Facelift S600 V12 works
- W207 on bench OK, 11 minutes
- W203 2004 spare key making takes about 13 minute when begining to programming new key. Read pass NEC key by IR and calculate PSW Key still working after get PSW.
- Test with my W209 545 31 08 on bench as add key: 15mins all done. Trying all key lost, failed. But a friend do with W209 545 05 08 succes PSW by IR without gayeway
- W246 2014 FSB3: Add key succesful in 15mins
  W219 2008: Add key also 15min OK
- W221 2008 with key v57 from Japan: Add key success after 30min, get PSW in the 2è upload.
W221 2010 Facelift Work too
2007 w221 from Japan: Add key on bench，good and very fast 10min got pass
Add Key on W221 2007, i was complete in ~12min. CGDI is very fast,Upload collect data after 2 or 3 min show me PW
Class C W203 2005 adding key on car.Spare key made in under 10 minutes.
W204 2010 adding key on bench.Total time about 15mn.
W212 2012 all key lost programming work!
CGDI MB tool works good to do W207 W204 lost keys on bench.
CGDI work not on all by OBD
W906 Sprinter don't work (CGDI Supports W906 only CAN BUS not K-line)
W230 SL55 AMG 2006 dont work (CGDI supports W230 CAN BUS, you can send EIS and CGDI MB tool to factory to add K-line)

CGDI MB Prog FAQs:

Q1: need to know more info about yello cable,its to kline butw here to connect it when using obdII and whene using on bdm ?
A1: When using OBD, need disconnect ESL connector and look for K line pin to connect Yellow clip. When using on bench: look for EZS-ELV wiring and plug the clip to kline pin

Q2: what about mileage correction (reset to 0)? vvdi vs cgdi
A2: CGDI can show mileage from EZS, new software come out, updated

Q3: when we have CGDI tool working all by OBD why lads want the tool to work on the bench???
A3: For example if car is some further from workshop and you must spent time driving to the car or customer is just TOO far to drive, so then he can sent EIS or drive by himself bringing EIS it with him at workshop. It's time saver and what if tool will not work via OBD? You will loose many time driving ex. 30 miles x2. If you have on bench, you can work at your place without risk of wasting time. Also calculating psw at the place of car might last 30 minutes, 1 hour in all keys lost? It's much time to sit in the car + you have to take care of battery charger. If you have on bench, you can drink a coffee or a beer if you want and enjoy the waiting time.Still no tool which can do all merc by OBD anyway...

CGDI MB Prog Package List:

1*CGDI MB Multiplexer
1* NEC Key Adapter
1*IR Adapter
1*OBD Cable
1*USB Cable
1*CGDI ELV Simulator
 

Technical Support:

Whatsapp: +8613310857275

Email: hkobdii@gmail.com


Shipping Method and Delivery Time:
1. DHL Shipping: Suitable for customers worldwide. Will take 3-5 working days.
2. CN POST: TAX Free for European Countries. Will take 7-10 working days normally.
3. Customers can also choose UPS, TNT FedEx or EMS if you have any special requirement as well as standard airmail- Singapore Post.